Garage door opener installation can be a pricy prospect, so it is always a good idea to try to do it yourself. If you are not comfortable doing it yourself, then do not hesitate to bring someone else in, but it is highly possibly to handle it yourself if you have some technical know how. Your garage door opener should have come with an instruction manual and this is vital to installing the new door. Keep this handy throughout the entire process to avoid problems. Next, measure the opening to find its center point along with the maximum height that the door will reach when opening. You will be able to place the mounting bracket higher, but you do not want to make a mistake here because you will have to start all over again. The manual will tell you how much clearance you should give your door.

The next step of garage door opener installation is to put the rails together. These rails are actually pretty easy to assemble and your manual will provide step by step instructions on how to accomplish this. The rails will attach to the bracket that you have already installed. You will need a ladder to hold the motor so that you can mount it. Be very careful with the motor because if it is dropped, it might not work anymore. The motor will be strapped to the rafters, but you will need to mount these straps before the motor will be completely secured. The final part of this section of your garage door opener installation is attaching the brackets to the door and to connect the arm to the door as well.

Now that this section of your garage door opener installation is done, you can move onto the control switch, which should be located high enough that children will not be able to reach it. If your garage door came with sensors, now is the time to install these as well. Also keep in mind that the motor should be plugged into a location that is within three feet of it, to prevent problems from arising with the cords. You might have to install an outlet if the motor is too far away from any outlets that you have. If things do not look right once everything has been installed, you might have to call for a professional adjustment because in some cases, the doors just do not fit properly.

If this sounds like too much for you, do not attempt to do your garage door opener installation on your own. There are plenty of professionals out there who can handle all of these issues for you and they are fully insured to handle any damages that might occur. This is one situation where it does take a little bit of know how to get the job done and there is no shame in leaving your garage door opener installation to the professionals.